Touch Up Paint For Powder Coated Patio Furniture

There are two main ways to refinish powder-coated furniture--strip it and start over or apply paint over the existing powder.

Touch up paint for powder coated patio furniture. It will leave a visible parting line between the original coated area and the touch-up area that is dry and rough looking. Although a powder coat finish can be touched up with acrylic enamel spray paint the touched up areas will not be as durable as the surrounding powder coat. One coat of powder is roughly equivalent to three or four coats of paint.

If the original job was properly prepared it will be difficult to remove a powder-coated finish. You cannot touch up a small area of a powder coated part with powder. There are two main ways to refinish powder-coated furniture--strip it and start over or apply paint over the existing powder.

Powder coating is used on a variety of surfaces including automobiles recreational equipment and patio furniture. Conclusion Painting over an existing powder coating is possible and can be helpful when you need to repair a powder coated surface. Since it does not have a liquid carrier it produces a thicker coating than regular paint.

Roll vertically stopping every few feet to scan for runs. Shake the touch-up powder paint can vigorously for two to three minutes each time you are going to use it to paint. The nice thing about powder is that you can recoat with another layer of powder without removing the old powder.

Smooth any runs with a china brush. Shake the touch-up powder paint can vigorously for two to three minutes each time you are going to use it to paint. Apply the paint at a distance of approximately 8 inches from the surface.

I sand and grind all loose paint off the project and then clean the entire piece with 91 isopropyl alcohol using lint free cloth. If the original job was properly prepared it will be difficult to remove a powder-coated finish. If you want to do a spot repair you can do it a couple ways.